State Certification Guides M

Michigan HVAC Certification Guide

HVAC technicians in Michigan can earn an average of $20 per hour. As an HVAC tech, you are required to deal with customer service and problem-solving. Therefore, if you think you have what it takes, then this career is for you. Before you can start working as an HVAC contractor in the state, you need a Mechanical Contractor’s license. In this article, we’re going to tackle everything you need to know about the Michigan HVAC industry and Michigan HVAC certification requirements. The information will include steps in getting your license, passing the exam, and the requirements you need to submit.

 

Michigan HVAC Certification and Licensing

To conduct maintenance, installation, or repair of HVAC units, you will need to get your mechanical contractor’s license. The licensing process along with application and exams are supervised by the Bureau of Construction Codes, Michigan Department of Licensing and Regularity Affairs, and the Mechanical Division.

The state’s licensing process is different to other states in the sense that you can use your examination process while looking for a job or if aiming to advance further in your current company. With a license, you can take on repairs, maintenance, installation, alternations, and servicing projects. You can also obtain all permits required for your projects.

However, not everyone can qualify for the mechanical contractor’s license examination. To qualify, these are the requirements you should possess:

 

  • At least 3 years of working experience in your preferred work classification
  • A passing score in an examination for your preferred classification

Listed below are the general work classifications you can choose from:

 

  • Ductwork
  • Fire suspension
  • Limited heating service
  • Limited refrigeration and air conditioning service
  • HVAC equipment
  • Refrigeration
  • Unlimited heating service
  • Unlimited refrigeration and air conditioning service

Meanwhile, these are the following fields where you can obtain a specialty license:

 

  • Fuel gas piping
  • Fuel gas piping and venting
  • LP distribution piping
  • Solar heating and cooling
  • Solid fuel and vented decorative gas appliances

You need to pay $100 for the application and another $25 for the examination process. Licenses are distributed in 3-year cycles, and you will need to pay $100 for each cycle. All of the contractors will share the same cycle, and the amount you need to cover will depend on which cycle you get your license.

So for example, if you obtain your license in the 2nd cycle, you need to pay $200 and $100 for the third cycle. However, if you’re an Electrical and Fire Alarm contractor, you only need to pay a $10 membership fee and a $10 license renewal deposit.

 

Taking the HVAC Examination

Before you proceed with the examination, you should first fill an application form and pay $100 to the state. After a successful application, you may then schedule an examination date. You should send your application to this address:

Application for Mechanical Contractor License Examination 127Michigan Department of Labor & Economic GrowthBureau of Construction Codes / Mechanical DivisionP.O. Box 30255, Lansing, MI 48909517-241-9325

Also, you can contact them if you have any questions regarding the application process. Keep in mind that the examination for the Mechanical Contractor’s License in Michigan is only given four times a year in Lansing. Each examination date also has its own application deadline which is scheduled one month prior to the exam.

You need to pay another $25 for the examination. The exam is written and consists of practices and theories related to local laws, mechanical codes, HVAC, and work classifications.

The examination consists of a section containing 15 questions regarding Basic Safety Rules, Construction Code Law and Rules, and Mechanical Contractor’s Law and Rules. You need to get at least a 70% score in your preferred work classification to pass the exam.

 

Income Opportunities in the Michigan HVAC Field

The Michigan HVAC industry has several lucrative employment opportunities. The industry is projected to experience a steady growth rate of 15% over the next ten years. As an HVAC technician, you are required to perform on-site labor, installation, repair, and maintenance of heating and cooling units.

The industry of HVAC is a constantly evolving field. You can see most equipment being frequently outdated and newer ones introduced. Experienced technicians with Michigan HVAC certification are always in demand for replacing old and faulty equipment and troubleshooting updated units.

The income you can earn as an HVAC technician in Michigan will vary from one place to another. For example, you can earn around $42,600 in Detroit city. Meanwhile, you can earn $42,600 in Dearborn Heights and Warren. HVAC technicians in Canton earn up to $44,470 while those in Ann Arbor can earn around $45,000. The better the Michigan HVAC certification you have, the better HVAC salary you can earn.

Senior technicians, especially those with several work classifications, can earn up to $60,000 per year. However, these figures are just for average salaries. In fact, Michigan is included in the top 48% of trade workers when it comes to annual earnings.

 

The Bottom Line

 

If you want to succeed as an HVAC technician in the ever-growing HVAC market in Michigan, you need to obtain various work classifications from different specialized fields. While the licensing process in the state of Michigan looks overwhelming at first, it can surely help you obtain a more stable income and a higher paying job.

 

If you can obtain more work classifications with at least three years of working experience in each, that’s even better. Once you can obtain a minimum of three years hands-on experience, you may then proceed to apply for an examination. We hope you now have a better idea about Michigan HVAC certification, and what you need to do to have a successful HVAC career.

Check out nearby states HVAC requirements:

Michigan HVAC certification guide