Want to work as an HVAC technician in Connecticut? Then you’ve come to the right place to learn about Connecticut HVAC certification! In case you’re wondering, there’s been a huge demand for HVAC technicians around Connecticut and the entire country also.
According to the Bureau of Labor Statistics, the number of qualified HVAC technicians is expected to rise by nearly 15% over the next ten years. Moreover, it’s been revealed that in recent years the demand for HVAC technicians has risen greatly and as a result of that the rate of pay has also risen faster for HVAC technicians than it has for other trades.
By working as an HVAC professional in Connecticut, you can expect an average hourly rate of just over $26 and this can rise up to as much as $37 an hour for experienced HVAC technicians. Meanwhile, the average annual salary is $54,500 and for experience and time served this figure can go up to as much as $76,500. These salary numbers are a great incentive to obtain Connecticut HVAC certification.
If you’re eager to pursue the trade, this article can provide you the information you need and how to apply to an accredited HVAC college in Connecticut.
Connecticut HVAC Certification Programs
You need to enrol in the right program if you want to increase your chances of success. The duration may vary based on your level of training. Sometimes, it will last for six months; but others may even take up to two years.
By enrolling in the right program, you can obtain all necessary skills that will help you prepare for the licensing examinations. Some of the training will include how to repair, service, install new units, or troubleshoot HVAC systems for problems.
You can also receive training about diagnosing problems involving ductwork, detailed wiring for electronic controls, electrical motors, and other items related to the HVAC industry. It also involves repairing heat pumps, learn how to work on ductless splits, install refrigerant controls, service and repair intake and exhaust humidifiers, and more.
The whole course will be geared up to show you the importance of both preventive maintenance and adherence to the Federal and State laws and how they are vital in your training. This is very important in the steps to acquiring Connecticut HVAC certification.
HVAC Training Schools in Connecticut
Porter and Chester Institute
When you inroll into an HVAC training course at Porter and Chester Institute you can choose between one of their many different campuses that are located in Branford, Rocky Hill, Waterbury, Enfield and Stratford. They have a comprehensive range of HVAC courses that cover everything you need to know about becoming an HVAC technician. You can cover air conditioning installation and servicing, duckwork instalation and heating and refridgeration work. As well as course work they also enable you to have hands-on work so that you fully understand practical as well as theoretical problems.
Lincoln Technical College
You can take a diploma in air conditioning, heating and ventalation and also refrigeration wen you enroll into a HVAC course at Lincoln Technical College. Their main two sites are located in New Britain and East Windsor. They have a course that thoroughly covers everything that you will need to become an HVAC engineer. As well as theoretical classes they also have hands-on classes covering temperature contol, refridgeration and air conditioning.
Industrial Management Training Institute
IMTI first started teaching HVAC courses back in 1986 and over that time have become recognised as an excellent place to study HVAC. The Industrial Management Training Institute offers both online and campus based courses. Their courses are a mixture of hands-on experience and also theoretical work as well. Their campus is at Waterbury and you can enroll in Core courses all the way up to Level 4 courses.
What You Need To Get an HVAC License in Connecticut
Before you can render services as an HVAC technician in Connecticut and get Connecticut HVAC certification, you should first obtain your license from the Department of Consumer Protection in the state. There are 20 types of licenses and they are as follows:
- B-1 Limited Gas and Oil Burner Contractor
- B-2 Limited Gas and Oil Burner Journeyperson
- B-3 Limited Gas and Oil Burner Contractor
- B-4 Limited Gas and Oil Burner Journeyperson
- D-1 Limited Warm Air, Air Conditioning, and Refrigeration Contractor
- D-2 Limited Warm Air, Air Conditioning, and Refrigeration Journeyperson
- D-3 Limited Cooling Contractor
- D-4 Limited Cooling Journeyperson
- G-1 Limited Heating, Piping, and Cooling Contractor
- G-2 Limited Heating, Piping, and Cooling Journeyperson
- S-1 Unlimited Heating, Piping, and Cooling Contractor
- S-2 Unlimited Heating, Piping, and Cooling Journeyperson
- S-3 Limited Heating, Cooling and Piping Contractor
- S-4 Limited Heating, Cooling, and Piping Journeyperson
- S-5 Limited Heating, Hot Water, and Steam Contractor
- S-6 Limited Heating, Hot Water, and Steam Journeyperson
- S-7 Limited Contractor
- S-8 Limited Journeyperson
- S-9 Limited Heating Cooling Contractor
- S-10 Limited Heating Cooling Journeyperson
You can also find additional details regarding the application process and requirements on the Connecticut Department of Consumer Protection website. If you want to apply for a Contractor license exam, you need to have worked for two years as a licensed journeyperson or must demonstrate that you have acquired the relevant experience and HVAC training.
You also need to successfully have taken and passed the Business and Law Exam and also you also need to have passed a Trade Exam. To apply for the Journeyperson licensing exam, you need to complete an apprenticeship program or demonstrate that you have acquired the equivalent training and experience.
Details about the Examination
The examinations will be set by PSI Exams, while all HVAC licenses are given by the Department of Consumer Protection. Before you take the exam, it is of utmost importance to study well.
During the examinations, you will come across the following topics:
- A/C and Heat Pump Equipment
- Fuel Gas Systems
- Combustion Air
- Chimneys, Flues, and Vents
- Hangers and Supports
- Furnaces and Heaters
- Heating and Cooling Principles
- Machine Room
- Oil Burners
- Refrigerants and Refrigeration
- Sound, Vibration and Seismic Control
- Testing, Adjusting and Balancing
- Ventilation and Exhaust
On average, an examination will last around 2 to 3 hours with a total of 60, 70, or 80 questions depending on the exam you’re taking. The passing score is 70% or above. You must also remember that you also have to pass the Business and Law Exam and the Trade Exam if you want to get your license. These exams will cover the following:
- Business Organization
- Estimating and Bidding
- Financial Management
- Environmental Safety
- Lien Law
- Tax Laws
- Labor Laws
- Project Management
- Risk Management